Merging Isis Guia do Utilizador descarregar pdf (Página 15)

ISIS User Guide : Chapter 4 - ISIS TC/IP Address Configuration

Page 15

Click on Internet Protocol (TCP/IP) to select it, then click on Properties to open the Internet Protocol (TCP/IP)

Properties dialog.

Click Use the following IP address: then click in the IP address: field and type in a suitable value, followed by

clicking in the Subnet mask: field and typing in a suitable value.

Typically, IP addresses can be, respectively: 192.168.0.3 (PMX) 192.168.0.4 (VCube) and 192.168.0.5 (ISIS), with a

common Subnet mask being 255.255.255.0. No default gateway is necessary.

Setting the ISIS Static IP Address

----------------------------

First, Power up the ISIS while holding down the STOP key for about 5 seconds. This screen appears:

The screen shows the current IP configuration of the ISIS. It will either show any IP address that has been assigned

by DHCP or the static IP address that has been loaded internally.

This screen also shows the hardware MAC address of the ethernet interface in the ISIS Main Unit

To set the IP address, use the CURSOR LEFT and CURSOR RIGHT ISIS keys to select any digit in the IP Address

field.

Use the ISIS CURSOR UP and CURSOR DOWN keys to move between the IP Address and Net Mask fields.

To change the selected digit in either the IP Address or Net Mask fields, use the TRACK SELECT 1-10 keys at the

top of the ISIS

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 54 55

Sem comentários

Merging Isis Guia do Utilizador Página 15