Merging Isis Guia do Utilizador descarregar pdf (Página 25)

ISIS User Guide : Chapter 7 - Jog/Shuttle Tuning

Page 25

Chapter 7 - Jog/Shuttle Tuning

To fine-tune jog/shuttle performance, please go to the Jog Wheel Settings section of the Settings > All Settings

> Application > Jog/Chase page.

Jog Wheel Settings

Controller The combo box offers a choice of hardware controller presets if ISIS is not already

selected, select it.

Auto Jog on move When ticked, any movement of the ISIS Jog Wheel enters Jog mode. When not

ticked, the ISIS JOG button must be pressed to enter Jog mode.

Auto-Solo Selection When ticked, all tracks in the current selection are Solo'd when jogging.

Speed ceiling Sets the maximum jog speed from a choice of 1X, 2X, 4X or 8X play speed

Smoothing Filter The Smoothing Filter parameter determines the length of the "fade in" and "fade

out" when beginning and ending scrubbing. Enter the required value in the box

expressed in video frames.

Flywheel inertia Low follows the actual movements as sent by the jog wheel. High passes the

actual movement through a smoothing filter. So, when the slider is set to Low the

Smoothing Filter parameters have no effect.

For sound to picture work where tight sync to picture is required use a setting

biased to Low. For a more pronounced flywheel effect choose a Higher setting.The

Middle position is a good starting point.

Transient response accelerator Optimizes Pyramix's reactivity to jog moves, settings range from

Smooth to Accurate.

When the slider approaches Accurate there may be some strange undesirable

effects.

Jog - sensitivity - seconds per revolution

Sets the time moved in one revolution of the jog wheel. Type the required value in

the box.

Shuttle - sensitivity - revolution to get nominal

Sets the fraction of a revolution required to maintain nominal speed. E.g. an entry

of 0.25 will require a quarter of a turn clockwise to achieve nominal speed.

Jump - sensitivity - number of revolutions to cross over the timeline

Sets the number of revolutions of the jog wheel required to traverse the visible

timeline. I.e. actual speed depends on Zoom factor.

Note: Note: If any of the Jog Wheel Settings are altered, the combo box changes to show

User Defined to reflect this. User defined settings can be saved for future use with the

Load and Save Pyramix settings functions.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 54 55

Sem comentários

Merging Isis Guia do Utilizador Página 25